DWM Wall Mount Rack

The DWM wall mount cabinet has been designed as a cost effective smaller system solution for mounting electronics equipment in secured and non-secured areas. The DWM features fully welded construction and has a load rating of 250 lbs. The DWM is 24” wide and available in depths of 17”, 22”, 26” and 30”, with RU height options of 12, 18 and 27. The reversible front doors are smoked glass. All doors feature a keyed lock for secured access. The back panel has cutouts to accommodate electrical outlets and knockouts in the top and bottom for conduit and cabling. Two pairs of fully adjustable mounting rails are included. The DWM wall mount cabinet features a black durable powder coat finish.

Certified Load Rating:

250 lbs.

Frames Include:

  • Two pairs of fully adjustable mounting channels
  • Individually numbered RU heights
  • Side panels are lockable and removable
  • Two knockout plates in back of rack
  • Mounting hardware
  • Rails are square by default but can be turned for tapped; the screw is 12-24
  • Durable powder coat finish
  • 250 lb. load rating
  • ROHS Compliant
  • ISO9001 Certified
  • Designed and manufactured in the USA

Design your rack on our Configurator for a quote, 3-D model, and techincal specifications.

 

Configurator
Find Your Sales Representative
Order Support

Shelves and Drawers:

Shelves

Our light-duty shelves are capable of supporting components up to 50 lbs., with the exception of the 1RU shelf that holds 15 lbs. They are designed with vents to keep equipment cool. Hold-down brackets can be ordered separately for previously purchased shelves. Vented shelves with hold-down brackets hold components safely in place. Our heavy-duty shelves are adjustable from 17” to 40”.

Retractable Shelf
Solid Front Shelf
Vented Shelf
Vented Shelf with Hold Down Bracket
Drawers

Our drawers install easily to provide convenient storage for extra cables, remote controls or media. They are available with or without locks, in heights of 2RU, 3RU and 4RU. All drawers feature a durable black powder coat finish.

Solid Drawer
Solid Drawer with Lock

Cable Management:

Lacing Bars

Lacing bars mount horizontally and assist in cable tie-down and provide strain relief for cabling. Both the “C” and straight models have punched slots to accept cable ties. They are offered in straight, “C” style 2″, 4″, and 6″ depths, and round 2” depth. Lacing bars are available in packs of 5 and feature a durable black powder coat finish.

Straight
“C” Style 2″ depth
“C” Style 4″ depth
“C” Style 6″ depth
Round

Cooling:

DWM Fan Kit

The DWM Fan Kit includes two 115V AC fans, 4.75″ x 4.75″ that deliver 60 CFM 27db each. The Fan Kit also includes fan guards, power cord with ground and mounting hardware.

Fan Panels

Fan Panels- Ultra Quiet Fans with Display

Fan panels come standard with static or adjustable digital temperature management. Static panels feature an 83-85º alarm set point, ensuring that your security components will operate at peak performance. Fan panels are 115V/15-amp and include ultra-quiet fans (27db). Adjustable thermostat fan panels come standard with a digital display. All fan panels include a 5 ft. power cord and a durable black powder coat finish.

Fan Panel with Display 2RU and 2 Fans
Fan Panel with Display 2RU and 4 Fans
Fan Panel with Display 3RU and 2 Fans

Power:

Basic Power

IC-Junior Economical power distribution with 6 outlets and 15-amp capacity. Base level spike and notice suppression.

IC-8 Series is basic power distribution for rack mounted equipment. Base level spike and noise suppression.

IC-8LM has two dimmable rack lights that slide into the chassis when not in use, plus a 20 segment color coded voltage meter which indicates low, acceptable or high levels of AC mains voltage.

Our one 12-outlet 115V/15-amp power strip for vertical mount or one 6-outlet 115V/15-amp for horizontal mount is available. All power strips include a 10 ft. cord. Other power strips are available. Contact your local sales representative for more information.

IC-Junior Economical Power Supply
IC-8 Basic Power Distribution
IC-8L Basic Power Distribution with Lights
IC-8LM Basic Power Distribution with Lights and Voltage Meter
Vertical Power Strip 48″Long
Horizontal Power Strip 17″ Long
Enhanced Power

IC-11-15A has 11 outlets total. One not switched and 9 switched on the back, and 1 not switched on the front. There is a circuit breaker on the front of the chassis and there is a base level spike and noise suppression. This includes a power cord with a NEMA5-20P plug on IC-11-20A.

IC-11-15A Enhanced Power Supply
IC-11-20A Enhanced Power Supply
Web Based Power

The AMCO Enclosures IC-IP-1520 is a micro-controller based power distribution device that can be accessed via internet or intranet communications using Ethernet or RS232 connection. With this remote access, individual AC receptacles can be turned on and off and monitored for electrical current flow.

  • The IC-IP-1520 has a twenty amp capacity and provides AC line conditioning and surge protection.
  • The IC-IP-1520 provides economical web or intranet based remote power control to six receptacles grouped into three individual Power Pods. Each of these Pods can be turned on and off individually from anywhere in the world. In addition, current draw can be monitored from 0.2 to 20.0 amps per power POD.
  • The IC-IP-1520 can be controlled by the on board web server graphic interface that can be accessed by any web browser. It can also be remote controlled by RS232 connection to commercial or proprietary control systems.

Web Based Power Control System
Sequenced Power
  • ICR-1500 3 Sequence 15-amp power best suited for single rack systems. Provides timed sequence up and sequence down. Can be remote controlled with latching contact.
  • IC-1520 3 Sequence 20-amp AC power with self-contained control circuit. Works alone or plug and play with other IC units. Local or remote activation with contact closure or IC5.
  • IC-2200 20-amp 2 sequence device for hard wired installation. Good for small systems requiring only 2 sequences. Also good for staging amplifiers on single circuit.
  • IC-PD1-4 Contains 4 sequenced 20-amp circuits which can be wired directly to a breaker panel. Plug and play with other AMCO devices.

ICR-1500 3 Sequence Power
IC-1520 3 Sequence Power
IC-2200 2 Sequence Power
IC-PD1-4 4 Sequence Power
Sequenced Power Accessories

The Sequenced Power Accessories are remote control and monitor our products. They feature key switch security and their LEDs report sequence operation and status. They are rack mounted and require no additional power supply.

IC5-RM-RS has a rotary knob for convenience when security is not an issue.

IC-DM-3 is an enhanced remote control combiner. Plug and play installation for remote control from 3 locations. This also provides connection to external alarm systems for easy, orderly sequence down in the event of an emergency situation.

Remote Control and Monitor
Remote control and Monitor with Rotary Switch
Remote Control Combiner
Surge Protection Power

Surge protection power strips are ideal for smaller environments that don’t have protective surge suppression at the facility level, or just when additional protection is needed. Parallel circuitry keeps our Surge protection power strips working even if a surge or spike disables surge suppression.

PDU2408N-15-120P1-1510NSP

Surge, 15A, 120V, 24″ Vertical, (8) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P

PDU2408N-15-120P1-1515NSP

Surge, 15A, 120V, 24″ Vertical, (8) NEMA 5-15R, power switch, 15 ft. power cord with 5-15P

PDU4814N-15-120P1-1510NSP

Surge, 15A, 120V, 48″ Vertical, (14) NEMA 5-15R, power switch, breakered, 10 ft. power cord with 5-15P

PDU6620N-15-120P1-1510NSP

Surge, 15A, 120V, 66″ Vertical, (20) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P

PDU6620N-20-120P1-2010NSP

Surge, 20A, 120V, Vertical, (20) NEMA 5-20R, power switch, 10 ft. power cord with 5-20P

PDU1910N-15-120P1-1510NSP

Surge, 15A, 120V, 19″ Horizontal, (10) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P

Non-Surge Protection Power

Non-Surge protection power strips are ideal for facilities already equipped with surge protection.

PDU2408N-15-120P1-1510NNS

Non-Surge 15A, 120V, 24″ Vertical, (8) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P

PDU4814N-15-120P1-1510NNS

Non-Surge, 15A, 120V, 48″ Vertical, (14) NEMA 5-15R, power switch, breakered,10 ft. power cord with 5-15P

PDU6620N-15-120P1-NB10NNS

Non-Surge, 15A, 120V, 66″ Vertical, (20) NEMA 5-15R, 10 ft. power cord with 5-15P

PDU6620N-20-120P1-NB10NNS

Non-Surge, 20A, 120V, 66″ Vertical, (20) NEMA 5-20R,10 ft. power cord with 5-20P

PDU6620N-20-120P1-NB10TNS

Non-Surge, 20A, 120V, 66″ Vertical, (20) NEMA 5-20R, 10 ft. power cord with L5-20P

PDU1910N-15-120P1-1510NNS

Non-Surge, 15A, 120V, 19″ Horizontal, (10) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P

PDU1910N-15-120P1-1515NNS

Non-Surge, 15A, 120V, 19″ Horizontal, (10) NEMA 5-15R, power switch, 15 ft. power cord with 5-15P

PDU1910N-20-120P1-2010NNS

Non-Surge, 20A, 120V, 19″ Horizontal, (10) NEMA 5-20R, power switch, 10 ft. power cord with 5-20P

Metered Non-Surge Protection Power

Metered non-surge protection power strips are ideal for facilities already equipped with surge protection.

PDU6620N-15-120P1-1510NNSM

Non-Surge, 15A, 120V, 66″ Vertical, (20) NEMA 5-15R, power switch, 10 ft. power cord with 5-15P, Power Meter – Amps, Volts, Watts and Power Factor Digital RMS Scrolling Power Meter +/- 2% Accuracy with Full Scale 60Hz sine wave input, Aggregate – Total Unit Monitoring

PDU6620N-20-120P1-2010NNSM

Non-Surge, 20A, 120V, 66″ Vertical, (20) NEMA 5-20R, power switch, 10 ft. power cord with 5-20P, Power Meter – Amps, Volts, Watts and Power Factor Digital RMS Scrolling Power Meter +/- 2% Accuracy with Full Scale 60Hz sine wave input, Aggregate – Total Unit Monitoring

PDU6620N-20-120P1-2010TNSM

Non-Surge, 20A, 120V, 66″ Vertical, (20) NEMA 5-20R, power switch,10 ft. power cord with L5-20P, Power Meter – Amps, Volts, Watts and Power Factor Digital RMS Scrolling Power Meter +/- 2% Accuracy with Full Scale 60Hz sine wave input, Aggregate – Total Unit Monitoring

PDU1910N-15-120P1-1510NNSM

Non-Surge, 15A, 120V, 19″ Horizontal, (10) NEMA 5-15R, 10 ft. power cord with 5-15P, Power Meter – Amps, Volts, Watts and Power Factor Digital RMS Scrolling Power Meter +/- 2% Accuracy with Full Scale 60Hz sine wave input, Aggregate – Total Unit Monitoring

Other Accessories:

Blanking Panels

Blanking panels are available in solid or vented styles. Use them to fill in empty RU spaces in your rack or to help manage the air flow. Blanking panels are available in 1RU, 2RU, 3RU, 4RU and 8RU panel heights and feature a durable powder coat finish. Formed blanking panels are aluminum and also available individually or in kits.

Solid Blanking Panels
Heavy Duty with Metal Shim

 Formed Blanking Panels

 Formed Blanking Panel Kits

Hardware Kits

Each rack ships with 50 each of Dzus M6 inserts and screws to make mounting hardware or components easy to install. Additional mounting hardware is available for equipment mounting:

T441 25 pieces, #10-32 x 1/2 black phillips pan head with washer
HK-1032-25 25 pieces, H801, #10-32 nut retainer
HK500 500 pieces, #10-32 x 1/2 black phillips pan head with washer
HKDZ-25 25 pieces, Dzus easy insert hardware kit

Note: 50 piece kits available for HKDZ-25 and HK-1032-25. Replace 25 with 50 in part number. (i.e., HK-1032-25 becomes HK-1032-50)

M6 Hardware For standard 19" mounting on 24" overall rack widths (24" width frames require two pairs of MCX mounting channels per frame)
Dzus M6 Hardware For standard 19" mounting on 24" overall rack widths (24" width frames require two pairs of MCX mounting channels per frame)
T441 Hardware
500 pieces #10-32 Hardware

GET IN TOUCH WITH US TODAY